RII20715 – Certificate II in Civil Construction

The following provides the packaging rules for this qualification, followed by the list of relevant units of competency.

Total number of units = 16 

10 core unit’s plus

6 elective units, of which:

·       at least five (5) must be chosen from electives

·       no more than one (1) may be chosen from elsewhere within this training package, or from another endorsed training package, or from an accredited course.

All elective units selected from outside this qualification must reflect current occupational and learning outcomes of this AQF qualification level.

There are both licensed and non-licensed units of competency relating to high risk work in the Resources and Infrastructure Industry Training Package. To be appointed under any statutory requirements in related roles, units of competency should be selected to meet the state/territory licensing requirements.

Units

Core Units

RIIBEF201D

Plan and organise work

RIICCM201D

Carry out measurements and calculations

RIICCM202D

Identify, locate and protect underground services

RIICCM203D

Read and interpret plans and job specifications

RIICCM205E

Carry out manual excavation

RIICCM207D

Spread and compact materials manually

RIICOM201D

Communicate in the workplace

RIISAM203D

Use hand and power tools

RIISAM204D

Operate small plant and equipment

RIIWHS201D

Work safely and follow WHS policies and procedures

 

Elective units

BSBDIV301

Work effectively with diversity

CPCCCM2007B

Use explosive power tools

• Prerequisite unit: CPCCOHS2001A Apply OHS requirements, policies and procedures in the construction industry

CPCCLDG3001A

Licence to perform dogging

CPCCLRG3001A

Licence to perform rigging basic level

• Prerequisite unit: CPCCLDG3001A Licence to perform dogging

CPCCLSF2001A

Licence to erect, alter and dismantle scaffolding basic level

FPICOT2239A

Trim and cross cut felled trees

FPIFGM3212

Fall trees manually – intermediate

RIICBS202D

Hand spread asphalt

RIICCM206D

Support plant operations

RIICCM208D

Carry out basic levelling

RIICCM209D

Carry out concrete work

RIICCM210D

Install trench support

RIICCM211D

Erect and dismantle temporary fencing and gates

RIICFW306D

Direct pile driving operations

RIICFW307D

Direct cast in-situ piling operations

RIICRC201D

Repair potholes

RIICRC208D

Lay pipes

RIIHAN211D

Conduct basic scaffolding operations

RIIHAN301D

Operate elevating work platform

RIIRIS202D

Respond to site based spills

RIISAM201D

Handle resources and infrastructure materials and safely dispose of nontoxic materials

RIISAM205D

Cut, weld and bend materials

RIIWHS202D

Enter and work in confined spaces

RIIWHS205D

Control traffic with stop-slow bat

RIIWMG203D

Drain and dewater civil construction site

TLILIC2005A

Licence to operate a boom-type elevating work platform (boom length 11 metres or more)

 

Have questions?

State (required) select from drop down list (required)


RII30115 – Certificate III in Surface Extraction Operations

The following provides the packaging rules for this qualification, followed by the list of relevant units of competency.

Total number of units = 13

3 core unit’s plus

10 elective units, of which:

·       one (1) must be chosen from Group A

·       one (1) must be chosen from Group B

·       at least three (3) must be chosen from Group C

·       no more than (3) may be chosen from Group D

·       no more than (2) may be chosen from within this training package, or from another endorsed training package, or from an accredited course.

All elective units selected from outside this qualification must reflect current occupational and learning outcomes of this AQF qualification level.

There are both licensed and non-licensed units of competency relating to high risk work in the Resources and Infrastructure Industry Training Package. To be appointed under any statutory requirements in related roles, units of competency should be selected to meet the state/territory licensing requirements.

There are prerequisites to imported units listed in this qualification. Where a unit is imported as an elective care must be taken to ensure that all prerequisites specified are complied with.

 

Units

Core Units

RIIENV201D

Identify and assess environmental and heritage concerns

RIIRIS301D

Apply risk management processes

RIIWHS201D

Work safely and follow WHS policies and procedures

 

Elective units

Group A 

Unit code 

Unit title 

RIICOM301D

Communicate information

RIICOM302D

Communicate workplace information

Group B

Unit code 

Unit title 

RIIGOV201D

Comply with site work processes/procedures

RIIQUA201D

Maintain and monitor site quality standards

Group C

Unit code 

Unit title 

MSAPMPER300C

Issue work permits

Prerequisite unit: RIIRIS201B Conduct local risk control

RIIBHD301D

Conduct surface blast hole drilling operations

RIIBHD304D

Set up and prepare for open cut drilling operations

RIIBHD305D

Conduct down-hole hammer drilling

RIIBLA301D

Conduct surface shotfiring operations

RIIMCO301D

Conduct control centre operations

RIIMCO302D

Conduct surface miner operations

RIIMCO303D

Conduct auger miner operations

RIIMEX301D

Conduct dredging operations

RIIMEX302D

Assess ground conditions

RIIMPG301D

Control and monitor automated plant/machinery

RIIMPO206D

Conduct bulk water truck operations

RIIMPO301D

Conduct hydraulic excavator operations

RIIMPO302D

Conduct hydraulic shovel operations

RIIMPO303D

Conduct rope shovel operations

RIIMPO304D

Conduct wheel loader operations

RIIMPO305E

Conduct coal stockpile dozer operations

RIIMPO306D

Operate plant/machinery on live stockpiles

RIIMPO308E

Conduct tracked dozer operations

RIIMPO309E

Conduct wheeled dozer operations

RIIMPO310E

Conduct grader operations

RIIMPO312D

Conduct scraper operations

RIIMPO313D

Conduct face loading operations

RIIMPO329D

Conduct dragline operations

RIIMPO330D

Conduct bucket wheel operations

RIIMPO331D

Conduct stockpile dozer operations

RIIMPO336D

Conduct belly dump truck operations

RIIMPO337D

Conduct articulated truck operations

RIIMPO338D

Conduct rigid haul truck operations

RIINHB307D

Conduct conventional core drilling

RIIPEO301D

Conduct conveyor-car high wall mining operations

RIIPRO301D

Conduct crushing and screening plant operations

RIIPRO302D

Perform process control room operations

RIIPRO303D

Conduct sand wash plant operations

RIISAM202D

Isolate and access plant

RIISAM301E

Test operational functions of vehicles and equipment

RIISRM301D

Blend stockpile materials

RIISRM302D

Conduct stockpile reclaiming operations

RIISRM303D

Move and position materials to form stockpiles

RIISRM304D

Maintain stockpiles

RIIVEH201D

Operate light vehicle

RIIVEH305E

Operate and maintain a four wheel drive vehicle

RIIVEH307E

Operate heavy rigid vehicle

Group D

Unit code 

Unit title 

AHCNAR303A

Implement revegetation works

AHCSAW301A

Construct conservation earthworks

BSBDIV301

Work effectively with diversity

BSBINN301

Promote innovation in a team environment

BSBPUR301

Purchase goods and services

CPCCLDG3001A

Licence to perform dogging

CPCCLSF3001A

Licence to erect, alter and dismantle scaffolding intermediate level

• Prerequisite unit: CPCCLSF2001A Licence to erect, alter and dismantle scaffolding basic level

HLTAID003

Provide first aid

MSL924001A

Process and interpret data

MSL943001A

Work safely with instruments that emit ionising radiation

MSL913002A

Plan and conduct laboratory/field work

MSL973001A

Perform basic tests

RIIBEF302D

Monitor site production activities

RIIBLA201D

Support shotfiring operations

RIIBLA205D

Store, handle and transport explosives

RIIBLA305D

Conduct secondary blasting

RIIBLA306D

Conduct accretion firing

RIIBLA307D

Conduct blast survey

RIIBLA308D

Conduct electronic blasting operations

RIICRC310D

Construct and maintain roads

RIIERR301D

Respond to mine incident

RIIERR302D

Respond to local emergencies and incidents

RIIERR308D

Extricate and transport people involved in incidents

RIIERR310D

Provide support for rescue operations

RIIHAN208D

Perform dogging

RIIHAN301D

Operate elevating work platforms

RIIHAN302D

Conduct intermediate scaffolding operations

RIIHAN304D

Conduct slewing crane operations

RIIHAN305D

Operate a gantry or overhead crane

RIIHAN306D

Carry out lifting using multiple cranes

RIIHAN307D

Operate a vehicle loading crane

RIIHAN311E

Conduct operations with integrated tool carrier

RIIPEO206D

Lay and recover cables and hoses

RIIRIS202D

Respond to site based spills

RIISAM303D

Shut down dredge for operator maintenance

RIISAM304D

Install, commission and maintain major conveyor equipment and systems

RIISAM305D

Repair and splice conveyor belting

RIISAM306D

Service and maintain conveyors, feeders and hoppers

RIISAM307D

Service and maintain crushers

RIISAM308D

Service and maintain screens

RIISAM309D

Service and maintain pumps

RIISTD301D

Take environmental samples and measurements

RIIVEH302D

Operate multi-combination vehicle

RIIVEH303D

Drive heavy combination vehicle

RIIVEH306D

Operate mine services vehicle

RIIWHS301D

Conduct safety and health investigations

TLIC3004A

Drive heavy rigid vehicle

TLID2022A

Conduct weighbridge operations

TLILIC0012A

Licence to operate a vehicle loading crane (capacity 10 metre tonnes and above)

TLILIC2005A

Licence to operate a boom-type elevating work platform (boom length 11 metres or more)

TLILIC2016B

Licence to drive a heavy rigid vehicle

TLILIC3003A

Licence to operate a bridge and gantry crane

TLILIC3008A

Licence to operate a slewing mobile crane (up to 20 tonnes)

TLILIC3017B

Licence to drive a heavy combination vehicle

TLILIC3018B

Licence to drive a multi combination vehicle

 

RII30815 – Certificate III in Civil Construction Plant Operations

The following provides the packaging rules for this qualification, followed by the list of relevant units of competency.

Total number of units = 19

14 core unit’s plus

5 elective units, of which:

·       at least one (1) must be chosen from Group A

·       at least two (2) must be chosen from Group B

·       no more than two (2) may be chosen from Group C

·       no more than one (1) may be chosen from elsewhere within this training package, or from another endorsed training package, or from an accredited course.

OR

·       at least two (2) must be chosen from Group A

·       a further three (3) may be chosen from Group A, B, or C

·       no more than one (1) may be chosen from elsewhere within this training package, or from another endorsed training package, or from an accredited course.

All elective units selected from outside this qualification must reflect current occupational and learning outcomes of this AQF qualification level.

There are both licensed and non-licensed units of competency relating to high risk work in the RII Resources and Infrastructure Industry Training Package. To be appointed under any statutory requirements in related roles, units of competency should be selected to meet the state/territory licensing requirements.

There are prerequisites to imported units listed in this qualification. Where a unit is imported as an elective care must be taken to ensure that all prerequisites specified are complied with.

Units

Core Units

RIIBEF201D

Plan and organise work

RIICCM201D

Carry out measurements and calculations

RIICCM202D

Identify, locate and protect underground services

RIICCM203D

Read and interpret plans and specifications

RIICCM205E

Carry out manual excavation

RIICCM206D

Support plant operations

RIICCM207D

Spread and compact materials manually

RIICCM208D

Carry out basic levelling

RIICOM201D

Communicate in the workplace

RIISAM201D

Handle resources and infrastructure materials and safely dispose of non toxic materials

RIISAM203D

Use hand and power tools

RIISAM204D

Operate small plant and equipment

RIIWHS201D

Work safely and follow WHS policies and procedures

RIIWMG203D

Drain and dewater civil construction site

 

Elective units

Group A

Unit code 

Unit title 

RIIMPO318E

Conduct civil construction skid steer loader operations

RIIMPO319D

Conduct backhoe/loader operations

RIIMPO320E

Conduct civil construction excavator operations

RIIMPO321E

Conduct civil construction wheeled front end loader operations

RIIMPO322D

Conduct civil construction tracked front end loader operations

RIIMPO323D

Conduct civil construction dozer operations

RIIMPO324E

Conduct civil construction grader operations

RIIMPO325D

Conduct civil construction scraper operations

RIIMPO327D

Conduct pipe layer operations

Group B

Unit code 

Unit title 

RIICRC308D

Conduct paver operations

RIICRC309D

Conduct stabiliser operations

RIIHAN309E

Conduct telescopic materials handler operations

RIIHAN311E

Conduct operations with integrated tool carrier

RIIMPO315D

Conduct tractor operations

RIIMPO316D

Conduct self propelled compactor operations

RIIMPO317E

Conduct roller operations

RIIMPO326D

Conduct civil construction water cart operations

RIIMPO328D

Conduct continuous bucket trencher operations

RIIMPO336D

Conduct belly dump truck operations

RIIMPO337D

Conduct articulated truck operations

RIIMPO338D

Conduct rigid haul truck operations

RIIVEH304D

Conduct tip truck operations

Group C

Unit code 

Unit title 

AHCSAW201A

Conduct erosion and sediment control activities

AHCSAW301A

Construct conservation earthworks

BSBDIV301

Work effectively with diversity

CPCCCM2007B

Use explosive power tools

§  Prerequisite unit: CPCCOHS2001A Apply OHS requirements, policies and procedures in the construction industry

CPCCLDG3001A

Licence to perform dogging

CPCCLSF2001A

Licence to erect, alter and dismantle scaffolding basic level

HLTAID003

Provide first aid

RIICCM204D

Place and fix reinforcement materials

RIICCM209D

Carry out concrete work

RIICCM210D

Install trench support

RIICCM211D

Erect and dismantle temporary fencing and gates

RIICRC201D

Repair potholes

RIICRC208D

Lay pipes

RIIHAN208D

Perform dogging

RIIHAN211D

Conduct basic scaffolding operations

RIIHAN301D

Operate elevating work platform

RIIHAN308E

Load and unload plant

RIIWHS205D

Control traffic with stop-slow bat

RIIQUA201D

Maintain and monitor site quality standards

RIIRIS201D

Conduct local risk control

RIIRIS202D

Respond to site based spills

RIISAM205D

Cut, weld and bend materials

RIISAM213D

Position and set up mobile lighting

RIIWHS202D

Enter and work in confined spaces

RIIWHS204D

Work safely at heights

TLILIC2005A

Licence to operate a boom-type elevating work platform (boom length 11 metres or more)

TLILIC3006A

Licence to operate a non-slewing mobile crane (greater than 3 tonnes capacity)

 

RII30915 – Certificate III in Civil Construction

The following provides the packaging rules for this qualification, followed by the list of relevant units of competency.

There are no prerequisites to imported units listed in this qualification.

The qualification has core and elective units of competency that cover the skills for the following eight (8) specialist and one (1) general Civil construction streams:

Stream 1 – Bituminous Surfacing

Stream 2 – Bridge Construction and Maintenance

Stream 3 – Pipe Laying

Stream 4 – Road Construction and Maintenance

Stream 5 – Road Marking

Stream 6 – Tunnel Construction

Stream 7 – Timber Bridge Construction and Maintenance

Stream 8 – Traffic Management

Stream 9 – Civil Construction General

The core and elective unit requirements of one (1) stream must be met for this qualification to be awarded.

All elective units selected for this qualification must reflect current occupational and learning outcomes of this AQF qualification level.

There are both licensed and non-licensed units of competency relating to high risk work in the Resources and Infrastructure Industry Training Package. To be appointed under any statutory requirements in related roles, units of competency should be selected to meet the state/territory licensing requirements.

There are prerequisites to imported units listed in this qualification. Where a unit is imported as an elective care must be taken to ensure that all prerequisites specified are complied with.

Requirements for completion of Stream 1 – Bituminous Surfacing include:

Total number of units = 25

7 core unit’s plus

18 elective units, of which:

·       seven (7) must be chosen from Group A

·       at least three (3) must be chosen from Group B

·       at least three (3) must be chosen from Group C

·       no more than five (5) may be chosen from elsewhere within this training package, or from another endorsed training package, or from an accredited course. 

Requirements for completion of Stream 2 – Bridge Construction and Maintenance include:

Total number of units = 25

7 core unit’s plus

18 elective units, of which:

·       eight (8) must be chosen from Group D

·       at least two (2) must be chosen from Group E

·       at least three (3) must be chosen from Group F

·       no more than five (5) may be chosen from elsewhere within this training package, or from another endorsed training package, or from an accredited course.

Requirements for completion of Stream 3 – Pipe Laying include:

Total number of units = 25

7 core unit’s plus

18 elective units, of which:

·       ten (10) must be chosen from Group G

·       at least one (1) must be chosen from Group H

·       at least three (3) must be chosen from Group I

·       no more than four (4) may be chosen from elsewhere within this training package, or from another endorsed training package, or from an accredited course.

Requirements for completion of Stream 4 – Road Construction and Maintenance include:

Total number of units = 25

7 core unit’s plus

18 elective units, of which:

·       nine (9) must be chosen from Group J

·       at least two (2) must be chosen from Group K

·       at least two (2) must be chosen from Group L

·       no more than five (5) may come from elsewhere within this training package, or from another endorsed training package, or from an accredited course

·       at least five (5) of the eighteen (18) elective units chosen must be road construction and maintenance (RIICRC) units.

Requirements for completion of Stream 5 – Road Marking include:

Total number of units = 22

7 core unit’s plus

15 elective units, of which:

·       ◾four (4) must be chosen from Group M

·       ◾at least one (1) must be chosen from Group N

·       ◾at least six (6) must be chosen from Group O

·       ◾no more than four (4) may come from elsewhere within this training package, or from another endorsed training package, or from an accredited course

·       ◾at least seven (7) of the fifteen (15) elective units chosen must be road marking (RIICRM) units.

Requirements for completion of Stream 6 – Tunnel Construction include:

Total number of units = 25

7 core unit’s plus

18 elective units, of which:

·       eight (8) must be chosen from Group P

·       at least three (3) must be chosen from Group Q

·       at least two (2) must be chosen from Group R

·       no more than five (5) may come from elsewhere within this training package, or from another endorsed training package, or from an accredited course.

·       at least two (2) of the eighteen (18) elective units chosen must be tunnel construction (RIICTC) units.

Requirements for completion of Stream 7 – Timber Bridge Construction and Maintenance include:

Total number of units = 28

7 core unit’s plus

21 elective units, of which:

·       ◾twelve (12) must be chosen from Group S

·       ◾at least two (2) must be chosen from Group T

·       ◾at least two (2) must be chosen from Group U

·       ◾no more than five (5) may be chosen from elsewhere within this training package, or from another endorsed training package, or from an accredited course.

Requirements for completion of Stream 8 – Traffic Management include:

Total number of units = 23

7 core unit’s plus

16 elective units, of which:

·       eight (8) must be chosen from Group V

·       at least two (2) must be chosen from Group W,

·       with at least three (3) must be chosen from Group X,

·       no more than three (3) may be chosen from elsewhere within this training package, or from another endorsed training package, or from an accredited course.

Requirements for completion of Stream 9 – Civil Construction General include:

Total number of units = 25

7 core units plus

18 elective units, of which:

·       at least ten (10) must be chosen from Group Y

·       at least three (3) must be chosen from Group Z

no more than five (5) may be chosen from elsewhere within this training package, or from another endorsed training package, or from an accredited course.