CPC30111 – Certificate III in Bricklaying/Blocklaying

To achieve this qualification, the candidate must demonstrate competency in:

  • 27 units of competency:
  • 21 core units
  • 6 elective units.

The elective units are to be chosen as follows:

  • from Groups A and B
  • up to 2 units from Certificate III or IV qualifications in CPC08 or another current Training Package, provided the integrity of the AQF alignment is ensured, and they contribute to a valid, industry-supported vocational outcome.

Some units in this qualification may have prerequisite requirements, which must be met when packaging the qualification. Users are referred to the list of CPC08 units with prerequisite unit requirements available in this Training Package for this purpose.

  • Units
  • Core Units
  • Brick and blocklaying field of work
  • Elective units

Units

Core Units
CPCCCA3002A Carry out setting out
CPCCCM1012A Work effectively and sustainably in the construction industry
CPCCCM1013A Plan and organise work
CPCCCM1014A Conduct workplace communication
CPCCCM1015A Carry out measurements and calculations
CPCCCM2001A Read and interpret plans and specifications
CPCCCM2006B Apply basic levelling procedures
CPCCCM2008B Erect and dismantle restricted height scaffolding
CPCCCM2009A Carry out basic demolition
CPCCOHS2001A Apply OHS requirements, policies and procedures in the construction industry
Brick and blocklaying field of work
CPCCBL2001A Handle and prepare bricklaying and blocklaying materials
CPCCBL2002A Use bricklaying and blocklaying tools and equipment
CPCCBL3002A Carry out masonry veneer construction
CPCCBL3003A Carry out cavity brick construction
CPCCBL3004A Construct masonry steps and stairs
CPCCBL3005A Lay masonry walls and corners
CPCCBL3006A Lay multi-thickness walls and piers
CPCCBL3009A Install flashings and damp proof course
CPCCBL3010A Construct masonry arches
CPCCBL3011A Construct curved walls
CPCCBL3014A Install fire-rated masonry construction
Elective units
Group A: Advanced brick and blocklaying
CPCCBL3001A Lay paving
CPCCBL3007A Install glass blockwork
CPCCBL3012A Construct fireplaces and chimneys
CPCCBL3013A Construct masonry structural systems
CPCCBL3015A Construct decorative brickwork
CPCCBL3016A Construct battered masonry walls and piers
CPCCBL3017A Carry out tuck pointing to brickwork
CPCCBL3018A Install aerated autoclaved concrete products
Group B: General elective units
CPCCCM2007B Use explosive power tools
CPCCCM2010B Work safely at heights
CPCCCM3001C Operate elevated work platforms
CPCCCO2013A Carry out concreting to simple forms
CPCCSF2004A Place and fix reinforcement materials
BSBSMB301 Investigate micro business opportunities
BSBSMB406 Manage small business finances

Have questions?

    State (required) select from drop down list (required)


    CPC30211 – Certificate III in Carpentry

    To achieve this qualification, the candidate must demonstrate competency in:

    • 30 units of competency:
    • 22 core units
    • 8 elective units.

    A maximum of two of the eight required elective units may be substituted by selecting relevant units of competency from any Certificate III or IV construction qualification or qualification in another endorsed Training Package.

    Some units in this qualification may have prerequisite requirements, which must be met when packaging the qualification. Users are referred to the list of CPC08 units with prerequisite unit requirements available in this Training Package for this purpose.

    • Units
    • Core Units
    • Construction and erection of frames, trusses, eaves and roofs field of work
    • Elective Units

    Units

    Core Units
    CPCCCA2002B Use carpentry tools and equipment
    CPCCCA2011A Handle carpentry materials
    CPCCCA3001A Carry out general demolition of minor building structures
    CPCCCA3002A Carry out setting out
    CPCCCA3023A Carry out levelling operations
    CPCCCM1012A Work effectively and sustainably in the construction industry
    CPCCCM1013A Plan and organise work
    CPCCCM1014A Conduct workplace communication
    CPCCCM1015A Carry out measurements and calculations
    CPCCCM2001A Read and interpret plans and specifications
    CPCCCM2002A Carry out excavation
    CPCCCM2007B Use explosive power tools
    CPCCCM2008B Erect and dismantle restricted height scaffolding
    CPCCCM2010B Work safely at heights
    CPCCCO2013A Carry out concreting to simple forms
    CPCCOHS2001A Apply OHS requirements, policies and procedures in the construction industry
    Construction and erection of frames, trusses, eaves and roofs field of work
    CPCCCA3003A Install flooring systems
    CPCCCA3004A Construct wall frames
    CPCCCA3005B Construct ceiling frames
    CPCCCA3006B Erect roof trusses
    CPCCCA3007C Construct pitched roofs
    CPCCCA3008B Construct eaves
    Elective Units
    Installation field of work
    CPCCCA3010A Install and replace windows and doors
    CPCCCA3012A Frame and fit wet area fixtures
    CPCCCA3013A Install lining, panelling and moulding
    CPCCCA3016A Construct timber external stairs
    Formwork construction field of work
    CPCCCA3018A Construct, erect and dismantle formwork for stairs and ramps
    CPCCCA3019A Erect and dismantle formwork to suspended slabs, columns, beams and walls
    CPCCCA3020A Erect and dismantle jump form formwork
    CPCCCA3021A Erect and dismantle slip form formwork
    General electives
    BSBSMB301 Investigate micro business opportunities
    BSBSMB406 Manage small business finances
    CPCCCA2003A Erect and dismantle formwork for footings and slabs on ground
    CPCCCA3009B Construct advanced roofs
    CPCCCA3011A Refurbish timber sashes to window frames
    CPCCCA3014A Construct bulkheads
    CPCCCA3015A Assemble partitions
    CPCCCA3017B Install exterior cladding
    CPCCCA3022A Install curtain walling
    CPCCCM3001C Operate elevated work platforms
    CPCCSF2003A Cut and bend materials using oxy-LPG equipment
    CPCCSF2004A Place and fix reinforcement materials
    CPCCWC3003A Install dry wall passive fire-rated systems
    RIICCM210D Install trench support
    RIIWHS202D Enter and work in confined spaces
    RIIWMG203D Drain and dewater civil construction site

    CPC30318 – Certificate III in Concreting

    To achieve this qualification, the candidate must demonstrate competency in:
    • 20 units of competency:
    • 15 core units
    • 5 elective units.

    • a minimum of three elective units must be chosen from the Group A concreting elective units listed below
    • the remaining two elective units may be chosen from:
    • the remaining Group A concreting elective units listed below
    • the Group B general elective units listed below
    • other units packaged in a Certificate III or Certificate IV qualification in the CPC Construction, Plumbing and Services Training Package, CPC08 Construction, Plumbing and Services Training Package, or other current Training Packages or accredited courses provided they do not duplicate the outcome of another unit already chosen for the qualification.

    • Units

    • Core Units

    • Concreter

    • Concrete tilt panel fabricator

    • Elective units

    Units

    Core Units

    CORE UNITS

     

    CPCCCA2003

     

     

    Erect and dismantle formwork for footings and slabs on ground

    CPCCCM1012

    Work effectively and sustainably in the construction industry

    CPCCCM1013

    Plan and organise work

    CPCCCM1014

    Conduct workplace communication

    CPCCCM1015

    Carry out measurements and calculations

    CPCCCM2001

    Read and interpret plans and specifications

    CPCCCM2006

    Apply basic levelling procedures

    CPCCCO2021

    Handle concreting materials

    CPCCCO2022

    Select, check and maintain concreting plant, tools and equipment

    CPCCCO3041

    Place concrete

    CPCCCO3042

    Finish concrete

    CPCCCO3043

    Cure concrete

    CPCCCO3053

    Slump-test concrete

    CPCCSF2004

    Place and fix reinforcement materials

    CPCCWHS2001

    Apply WHS requirements, policies and procedures in the construction industry

    Elective units

    Group A: Concreting elective units

    CPCCCO3035*

    Assess and specify concrete supply requirements

    CPCCCO3036*

    Plan concrete work and brief team

    CPCCCO3044*

    Apply decorative finishes to concrete

    CPCCCO3046*

    Repair and rectify concrete

    CPCCCO3047*

    Cut and core concrete

    CPCCCO3048*

    Construct tilt panels on site

    CPCCCO3049*

    Apply and finish sprayed concrete

    CPCCCO3050*

    Carry out high performance concreting

    CPCCCO3051*

    Conduct off-form vertical concrete operations

    CPCCCO3052*

    Conduct concrete boom delivery operations

    CPCCCO3054*

    Operate concrete agitator trucks

    CPCCCO3055*

    Install topping slabs

    Group B: General elective units

     

    CPCCCA3001*

    Carry out general demolition of minor building structures

     

    CPCCCM1016

    Identify requirements for safe tilt-up work

     

    CPCCCM2007*

    Use explosive power tools

     

    CPCCCM2008*

    Erect and dismantle restricted height scaffolding

     

    CPCCLBM3001

    Licence to operate a concrete placing boom

     

    CPCCSF2003*

    Cut and bend materials using oxy-LPG equipment

     

    CPCCSF3001*

    Apply reinforcement schedule

     

    CPC30611 – Certificate III in Painting and Decorating

    To achieve this qualification, the candidate must demonstrate competency in:

    ·       27 units of competency:

    ·       23 core units

    ·       4 elective units.

    A maximum of two of the four required elective units may be substituted by selecting relevant units of competency from any Certificate III or IV construction qualification or qualification in another endorsed Training Package.

    Some units in this qualification may have prerequisite requirements, which must be met when packaging the qualification. Users are referred to the list of CPC08 units with prerequisite unit requirements available in this Training Package for this purpose.

    Units

    Core Units
    CPCCCM1012A Work effectively and sustainably in the construction industry
    CPCCCM1013A Plan and organise work
    CPCCCM1014A Conduct workplace communication
    CPCCCM1015A Carry out measurements and calculations
    CPCCCM2001A Read and interpret plans and specifications
    CPCCCM2003B Calculate and cost construction work
    CPCCCM2010B Work safely at heights
    CPCCOHS2001A Apply OHS requirements, policies and procedures in the construction industry
    Painting and decorating preparation field of work
    CPCCCM3001C Operate elevated work platforms
    CPCCPB3026B Erect and maintain trestle and plank systems
    CPCCPD2011A Handle painting and decorating materials
    CPCCPD2012A Use painting and decorating tools and equipment
    CPCCPD2013A Remove and replace doors and door and window components
    CPCCPD3021A Prepare surfaces for painting
    Painting and decorating operations field of work
    CPCCCM2008B Erect and dismantle restricted height scaffolding
    CPCCPD3022A Apply paint by brush and roller
    CPCCPD3023A Apply texture coat paint finishes by brush, roller and spray
    CPCCPD3024A Apply paint by spray
    CPCCPD3025A Match specified paint colour
    CPCCPD3026A Apply stains and clear timber finishes
    CPCCPD3027A Apply wallpaper
    CPCCPD3028A Apply decorative paint finishes
    CPCCPD3031A Implement safe lead paint and asbestos work practices in the painting industry
    Elective units
    Specialist painting and decorating field of work
    CPCCPD3029A Remove graffiti and apply protective coatings
    CPCCPD3030B Apply protective paint coating systems
    CPCCPD3032A Apply advanced wallpaper techniques
    CPCCPD3033A Apply intumescent coatings
    CPCCPD3034A Apply advanced decorative paint finishes
    CPCCSP3003A Apply trowelled texture coat finishes
    General electives
    BSBSMB301 Investigate micro business opportunities
    BSBSMB406 Manage small business finances
    LMFGG2008B Glaze/re-glaze residential windows and doors

    CPC31211 – Certificate III in Wall and Ceiling Lining

    To achieve this qualification, the candidate must demonstrate competency in:

    • 26 units of competency:
    • 19 core units
    • 7 elective units.

    A maximum of two of the seven required elective units may be substituted by selecting relevant units of competency from any Certificate III or IV construction qualification or qualification in another endorsed Training Package.

    Some units in this qualification may have prerequisite requirements, which must be met when packaging the qualification. Users are referred to the list of CPC08 units with prerequisite unit requirements available in this Training Package for this purpose.

    • Units
    • Core Units
    • Fixing (hanging) field of work
    • Finishing (stopping, sanding and cornices) field of work
    • Elective units

    Units

    Core Units
    CPCCCM1012A Work effectively and sustainably in the construction industry
    CPCCCM1013A Plan and organise work
    CPCCCM1014A Conduct workplace communication
    CPCCCM1015A Carry out measurements and calculations
    CPCCCM2001A Read and interpret plans and specifications
    CPCCCM2010B Work safely at heights
    CPCCOHS2001A Apply OHS requirements, policies and procedures in the construction industry
    Fixing (hanging) field of work
    CPCCPB3001A Fix standard plasterboard wall sheets
    CPCCPB3002A Fix standard plasterboard ceiling sheets
    CPCCPB3003A Fix battens
    CPCCPB3004A Fix wet area sheets
    CPCCPB3005A Fix ceiling sheets to external protected areas
    CPCCPB3006A Fix fibre cement board
    Finishing (stopping, sanding and cornices) field of work
    CPCCPB3007A Apply levels of finish standards to planning and inspection of own work
    CPCCPB3008A Mix plastering compounds
    CPCCPB3009A Finish plasterboard joins manually
    CPCCPB3010A Manually sand plaster work
    CPCCPB3011A Finish category 1 and 2 wet areas
    CPCCPB3012A Cut and fix paper-faced cornices
    Elective units
    Commercial wall and ceiling lining field of work
    CPCCCA3014A Construct bulkheads
    CPCCCA3015A Assemble partitions
    CPCCCM2006B Apply basic levelling procedures
    CPCCCM2007B Use explosive power tools
    CPCCWC3001A Install and finish plasterboard and fibre cement sheeting to curved walls and ceilings
    CPCCWC3003A Install dry wall passive fire-rated systems
    CPCCWC3004A Install suspended ceilings
    Plasterboard handling field of work
    CPCCPB3023A Load and unload plaster and plaster-related products
    CPCCPB3024A Use manual handling equipment to manoeuvre plaster products
    CPCCPB3025A Store plasterboard and related products
    General electives
    BSBSMB301 Investigate micro business opportunities
    BSBSMB406 Manage small business finances
    CPCCCA3001A Carry out general demolition of minor building structures
    CPCCCM2008B Erect and dismantle restricted height scaffolding
    CPCCCM3001C Operate elevated work platforms
    CPCCPB3013A Plan travel routes
    CPCCPB3014A Install batt insulation products
    CPCCPB3015A Install acoustic and thermal environmental protection systems
    CPCCPB3016A Install and finish columns
    CPCCPB3017A Rectify faults in plaster applications
    CPCCPB3018A Use vacuum and electric sanding equipment to finish plaster work
    CPCCPB3019A Inspect equipment for serviceability
    CPCCPB3020A Match, mitre and install cast ornamental cornices
    CPCCPB3021A Install and fix residential acoustic plaster products
    CPCCPB3022A Use mechanical jointing equipment to finish joints
    CPCCPB3026B Erect and maintain trestle and plank systems
    CPCCPB3027A Install ceiling insulation
    CPCCSP3003A Apply trowelled texture coat finishes
    CPCCSP3005A Install pre-cast decorative mouldings
    CPCCWC2001A Complete penetrations and flashings
    CPCCWC3002A Install and finish plasterboard and fibre cement sheeting to arches

    CPC31311 – Certificate III in Wall and Floor Tiling

    To achieve this qualification, the candidate must demonstrate competency in:

    • 19 units of competency:
    • 16 core units
    • 3 elective units.

    A maximum of one of the three required elective units may be substituted by selecting relevant units of competency from any Certificate III or IV construction qualification or qualification in another endorsed Training Package.

    Some units in this qualification may have prerequisite requirements, which must be met when packaging the qualification. Users are referred to the list of CPC08 units with prerequisite unit requirements available in this Training Package for this purpose.

    • Units
    • Core Units
    • Wall and floor tiling field of work
    • Elective units

    Units

    Core Units
    CPCCCM1012A Work effectively and sustainably in the construction industry
    CPCCCM1013A Plan and organise work
    CPCCCM1014A Conduct workplace communication
    CPCCCM1015A Carry out measurements and calculations
    CPCCCM2001A Read and interpret plans and specifications
    CPCCCM2006B Apply basic levelling procedures
    CPCCOHS2001A Apply OHS requirements, policies and procedures in the construction industry
    Wall and floor tiling field of work
    CPCCWF2001A Handle wall and floor tiling materials
    CPCCWF2002A Use wall and floor tiling tools and equipment
    CPCCWF3001A Prepare surfaces for tiling application
    CPCCWF3002A Fix floor tiles
    CPCCWF3003A Fix wall tiles
    CPCCWF3004A Repair wall and floor tiles
    CPCCWF3006A Carry out mosaic tiling
    CPCCWF3007A Tile curved surfaces
    CPCCWP3002A Apply waterproofing process to internal wet areas
    Elective units
    Advanced tiling field of work
    Carry out decorative tiling
    Tile domestic pools and spas
    General electives
    Investigate micro business opportunities
    Manage small business finances
    Erect and dismantle restricted height scaffolding
    Work safely at heights
    Operate elevated work platforms
    Carry out concreting to simple forms

    CPC31411 – Certificate III in Construction Waterproofing

    To achieve this qualification, the candidate must demonstrate competency in:

    • 19 units of competency:
    • 14 core units
    • 5 elective units.

    A maximum of two of the five required elective units may be substituted by selecting relevant units of competency from any Certificate III or IV construction qualification or qualification in another endorsed Training Package.

    Some units in this qualification may have prerequisite requirements, which must be met when packaging the qualification. Users are referred to the list of CPC08 units with prerequisite unit requirements available in this Training Package for this purpose.

    • Units
    • Core Units
    • Waterproofing preparation field of work
    • Waterproofing operations field of work
    • Elective units

    Units

    Core Units
    CPCCCM1012A Work effectively and sustainably in the construction industry
    CPCCCM1013A Plan and organise work
    CPCCCM1014A Conduct workplace communication
    CPCCCM1015A Carry out measurements and calculations
    CPCCCM2001A Read and interpret plans and specifications
    CPCCOHS2001A Apply OHS requirements, policies and procedures in the construction industry
    Waterproofing preparation field of work
    CPCCWP2001A Handle waterproofing materials
    CPCCWP2002A Use waterproofing tools and equipment
    CPCCWP2003A Prepare for construction waterproofing process
    CPCCWP2004A Prepare surfaces for waterproofing application
    Waterproofing operations field of work
    CPCCWP3001A Apply waterproofing process to below ground level wet areas
    CPCCWP3002A Apply waterproofing process to internal wet areas
    CPCCWP3003A Apply waterproofing process to external wet areas
    CPCCWP3004A Apply waterproofing remedial processes
    Elective units
    BSBSMB301 Investigate micro business opportunities
    BSBSMB406 Manage small business finances
    CPCCCA3012A Frame and fit wet area fixtures
    CPCCCM2002A Carry out excavation
    CPCCCM2006B Apply basic levelling procedures
    CPCCCM2007B Use explosive power tools
    CPCCCM2008B Erect and dismantle restricted height scaffolding
    CPCCCM2009A Carry out basic demolition
    CPCCCM2010B Work safely at heights
    CPCCCM3001C Operate elevated work platforms
    CPCCCO2013A Carry out concreting to simple forms
    CPCCSH2003A Apply and install sealant and sealant devices

    CPC31511 – Certificate III in Formwork/Falsework

    To achieve this qualification, the candidate must demonstrate competency in:

    • 25 units of competency:
    • 19 core units
    • 6 elective units.

    A maximum of two of the required six elective units may be substituted by selecting relevant units of competency from any Certificate III or IV construction qualification or qualification in another endorsed Training Package.

    Some units in this qualification may have prerequisite requirements, which must be met when packaging the qualification. Users are referred to the list of CPC08 units with prerequisite unit requirements available in this Training Package for this purpose.

    • Units
    • Core Units
    • Formwork construction field of work
    • Elective units

    Units

    Core Units
    CPCCCA2002B Use carpentry tools and equipment
    CPCCCA2011A Handle carpentry materials
    CPCCCA3001A Carry out general demolition of minor building structures
    CPCCCA3002A Carry out setting out
    CPCCCA3023A Carry out levelling operations
    CPCCCM1012A Work effectively and sustainably in the construction industry
    CPCCCM1013A Plan and organise work
    CPCCCM1014A Conduct workplace communication
    CPCCCM1015A Carry out measurements and calculations
    CPCCCM2001A Read and interpret plans and specifications
    CPCCCM2002A Carry out excavation
    CPCCCM2007B Use explosive power tools
    CPCCCM2008B Erect and dismantle restricted height scaffolding
    CPCCCM2010B Work safely at heights
    CPCCCO2013A Carry out concreting to simple forms
    CPCCOHS2001A Apply OHS requirements, policies and procedures in the construction industry
    Formwork construction field of work
    CPCCCA2003A Erect and dismantle formwork for footings and slabs on ground
    CPCCCA3018A Construct, erect and dismantle formwork for stairs and ramps
    CPCCCA3019A Erect and dismantle formwork to suspended slabs, columns, beams and walls
    Elective units
    BSBSMB301 Investigate micro business opportunities
    BSBSMB406 Manage small business finances
    CPCCCA3014A Construct bulkheads
    CPCCCA3015A Assemble partitions
    CPCCCA3016A Construct timber external stairs
    CPCCCA3020A Erect and dismantle jump form formwork
    CPCCCA3021A Erect and dismantle slip form formwork
    CPCCCA3022A Install curtain walling
    CPCCCM3001C Operate elevated work platforms
    CPCCSF2003A Cut and bend materials using oxy-LPG equipment
    CPCCSF2004A Place and fix reinforcement materials
    CPCCWC3003A Install dry wall passive fire-rated systems
    RIICCM210D Install trench support
    RIIWHS202D Enter and work in confined spaces
    RIIWMG203D Drain and dewater civil construction site

    CPC32313 – Certificate III in Stonemasonry (Monumental/Installation)

    To achieve this qualification, the candidate must demonstrate competency in:

    • 30 units of competency:
    • 21 core units
    • 9 elective units.

    The elective units must ensure the integrity of the AQF alignment and contribute to a valid, industry-supported vocational outcome and are to be chosen as follows:

    • 9 units from the elective units listed below
    • 2 of the units may be chosen from other Certificate III qualifications in CPC08 or another current Training Package or accredited course.

    Some units in this qualification may have prerequisite requirements, which must be met when packaging the qualification. Users are referred to the list of CPC08 units with prerequisite unit requirements available in this Training Package for this purpose.

    • Units
    • Core Units
    • Elective units

    Units

    Core Units
    CPCCCA3002A Carry out setting out
    CPCCCA3023A Carry out levelling operations
    CPCCCM1012A Work effectively and sustainably in the construction industry
    CPCCCM1013A Plan and organise work
    CPCCCM1014A Conduct workplace communication
    CPCCCM1015A Carry out measurements and calculations
    CPCCCM2001A Read and interpret plans and specifications
    CPCCCM2002A Carry out excavation
    CPCCCM2005B Use construction tools and equipment
    CPCCCM2008B Erect and dismantle restricted height scaffolding
    CPCCCO2013A Carry out concreting to simple forms
    CPCCOHS2001A Apply OHS requirements, policies and procedures in the construction industry
    CPCCST2003A Finish stone
    CPCCST2004A Lay stone
    CPCCST2006A Identify and use stone products
    CPCCST3001A Dress and mould stone
    CPCCST3002A Shape solid stone
    CPCCST3003A Split stone manually
    CPCCST3004A Dress stone manually
    CPCCST3006A Machine stone
    CPCCST3022A Carry out profile work
    Elective units
    BSBSMB301 Investigate micro business opportunities
    BSBSMB406 Manage small business finances
    CPCCBL3016A Construct battered masonry walls and piers
    CPCCCA3014A Construct bulkheads
    CPCCCM2007B Use explosive power tools
    CPCCCM2009A Carry out basic demolition
    CPCCCM2010B Work safely at heights
    CPCCCM3001C Operate elevated work platforms
    CPCCJN2001A Assemble components
    CPCCJN2003A Package manufactured products for transport
    CPCCPA3001A Prepare subgrade, base and bedding course for segmental paving
    CPCCPA3002A Lay segmental pavers
    CPCCPA3003A Cut segmental pavers
    CPCCST2005A Carry out load slinging of off-site materials
    CPCCST3007A Turn stone
    CPCCST3009A Use computer-controlled static machinery to produce stone components
    CPCCST3010A Set out and cut letters in stone
    CPCCST3011A Plan monument construction
    CPCCST3012A Build stone veneer walls
    CPCCST3013A Carry out cemetery monument fixing
    CPCCST3014A Set and anchor stone facades
    CPCCST3015A Apply gilding to stone
    CPCCST3016A Build solid stonemasonry walls
    CPCCST3017A Construct stone arches
    CPCCST3018A Inlay lead to stone
    CPCCST3019A Lay stonemasonry stairs
    CPCCST3020A Produce reconstituted stone
    CPCCST3021A Renovate and restore stone work

    CPC40110 – Certificate IV in Building and Construction (Building)

    To achieve this qualification, the candidate must demonstrate competency in:

    • 16 units of competency:
    • 13 core units
    • 3 elective units.

    The elective units must be selected as follows:

    • all three elective units may be selected from the elective units listed below
    • two of the three elective units may be selected from Certificate III, Certificate IV or Diploma from another endorsed Training Package or from CPC08, provided that at least one unit is from Certificate IV and the industry context is maintained.

    Some units in this qualification may have prerequisite requirements, which must be met when packaging the qualification. Users are referred to the list of CPC08 units with prerequisite unit requirements available in this Training Package for this purpose.

    • Units
    • Core Units
    • Elective units

    Units

    Core Units
    BSBSMB406A Manage small business finances
    CPCCBC4001A Apply building codes and standards to the construction process for low rise building projects
    CPCCBC4002A Manage occupational health and safety in the building and construction workplace
    CPCCBC4003A Select and prepare a construction contract
    CPCCBC4004A Identify and produce estimated costs for building and construction projects
    CPCCBC4005A Produce labour and material schedules for ordering
    CPCCBC4006B Select, procure and store construction materials for low rise projects
    CPCCBC4007A Plan building or construction work
    CPCCBC4008B Conduct on-site supervision of building and construction projects
    CPCCBC4009B Apply legal requirements to building and construction projects
    CPCCBC4010B Apply structural principles to residential low rise constructions
    CPCCBC4011B Apply structural principles to commercial low rise constructions
    CPCCBC4012B Read and interpret plans and specifications
    Elective units
    BSBLDR403 Promote team effectiveness
    BSBITU201 Produce simple word processed documents
    BSBITU202 Create and use spreadsheets
    BSBITU301 Create and use databases
    BSBMGT403 Implement continuous improvement
    BSBPMG411 Apply project quality management techniques
    BSBPMG415 Apply project risk management techniques
    BSBPMG522 Undertake project work
    BSBSMB401 Establish legal and risk management requirements of small business
    BSBSMB402 Plan small business finances
    BSBSMB404 Undertake small business planning
    BSBSMB405 Monitor and manage small business operations
    BSBLDR402 Lead effective workplace relationships
    BSBWRT401 Write complex documents
    CPCCBC4013A Prepare and evaluate tender documentation
    CPCCBC4014A Prepare simple building sketches and drawings
    CPCCBC4015A Prepare specifications for all construction works
    CPCCBC4016A Administer a construction contract
    CPCCBC4017A Arrange resources and prepare for the building or construction project
    CPCCBC4018A Apply site surveys and set-out procedures to building and construction projects
    CPCCBC4019A Apply sustainable building design principles to water management systems
    CPCCBC4020A Build thermally efficient and sustainable structures
    CPCCBC4021A Minimise waste on the building and construction site
    CPCCBC4022A Supervise tilt-up work
    CPCCBC4024A Resolve business disputes
    CPCCBC4025A Manage personal work priorities and professional development
    CPCCBC4026A Arrange building applications and approvals
    CPCCBC4051A Supervise asbestos removal
    CPCCWHS1001 Prepare to work safely in the construction industry
    CPCSUS4001A Implement and monitor environmentally sustainable work practices
    CPCSUS4002A Use building science principles to construct energy efficient buildings
    CPCSUS4003A Maximise energy efficiency through applied trade skills
    HLTHIR403C Work effectively with culturally diverse clients and co-workers
    TAEDEL402 Plan, organise and facilitate learning in the workplace

    CPC50210 – Diploma of Building and Construction (Building)

    To achieve this qualification, the candidate must demonstrate competency in:

    • 18 units of competency:
    • 13 core units
    • 5 elective units.

    The elective units must be selected as follows:

    • a minimum of 3 elective units must be from Group A units below
    • a maximum of 2 further elective units may be from Group B units below
    • 1 elective unit may be from Diploma level in from CPC08 or another endorsed Training Package, provided that the industry context of the qualification is maintained
    • 2 elective units may be from any Certificate IV in CPC08
    • 1 elective unit may be from any Advanced Diploma in CPC08.
    • Some units in this qualification may have prerequisite requirements, which must be met when packaging the qualification. Users are referred to the list of CPC08 units with prerequisite unit requirements available in this Training Package for this purpose.
    • Units
    • Core Units
    • Elective units

    Units

    Core Units
    BSBOHS504B Apply principles of OHS risk management
    BSBPMG505A Manage project quality
    BSBPMG508A Manage project risk
    CPCCBC4001A Apply building codes and standards to the construction process for low rise building projects
    CPCCBC4003A Select and prepare a construction contract
    CPCCBC4004A Identify and produce estimated costs for building and construction projects
    CPCCBC4010B Apply structural principles to residential low rise constructions
    CPCCBC4013A Prepare and evaluate tender documentation
    CPCCBC5001B Apply building codes and standards to the construction process for medium rise building projects
    CPCCBC5002A Monitor costing systems on medium rise building and construction projects
    CPCCBC5003A Supervise the planning of on-site medium rise building or construction work
    CPCCBC5010B Manage construction work
    CPCCBC5018A Apply structural principles to the construction of medium rise buildings
    Elective units
    Elective units – Group A
    CPCCBC5004A Supervise and apply quality standards to the selection of building and construction materials
    CPCCBC5005A Select and manage building and construction contractors
    CPCCBC5006B Apply site surveys and set-out procedures to medium rise building projects
    CPCCBC5007B Administer the legal obligations of a building or construction contractor
    CPCCBC5009A Identify services layout and connection methods to medium rise construction projects
    CPCCBC5011A Manage environmental management practices and processes in building and construction
    CPCCBC5012A Manage the application and monitoring of energy conservation and management practices and processes
    CPCCBC5013A Develop professional technical and legal reports on building and construction projects
    CPCSUS5001A Develop workplace policies and procedures for sustainability
    CPCSUS5002A Develop action plans to retrofit existing buildings for energy efficiency
    CPCSUS5003A Manage energy efficient building methods and strategies
    Elective units – Group B
    BSBCUS501 Manage quality customer service
    BSBFIM501 Manage budgets and financial plans
    BSBHRM509 Manage rehabilitation or return to work programs
    BSBINN502 Build and sustain an innovative work environment
    BSBITA401 Design databases
    BSBITU402 Develop and use complex spreadsheets
    BSBITU404 Produce complex desktop published documents
    BSBLED502 Manage programs that promote personal effectiveness
    BSBMGT502 Manage people performance
    BSBMGT517 Manage operational plan
    BSBRSK501 Manage risk
    BSBSLS502 Lead and manage a sales team
    BSBWOR501 Manage personal work priorities and professional development
    BSBWOR502 Lead team effectiveness
    CPCCBC4005A Produce labour and material schedules for ordering
    CPCCBC4006B Select, procure and store construction materials for low rise projects
    CPCCBC4009B Apply legal requirements to building and construction projects
    CPCCBC4011B Apply structural principles to commercial low rise constructions
    CPCCBC4012B Read and interpret plans and specifications
    CPCCBC4014A Prepare simple building sketches and drawings
    CPCCBC4018A Apply site surveys and set-out procedures to building and construction projects
    CPCCBC4024A Resolve business disputes
    CPCCBC5004A Supervise and apply quality standards to the selection of building and construction materials
    CPCCBC5005A Select and manage building and construction contractors
    CPCCBC5006B Apply site surveys and set-out procedures to medium rise building projects
    CPCCBC5007B Administer the legal obligations of a building or construction contractor
    CPCCBC5009A Identify services layout and connection methods to medium rise construction projects
    CPCCBC5011A Manage environmental management practices and processes in building and construction
    CPCCBC5012A Manage the application and monitoring of energy conservation and management practices and processes
    CPCCBC5013A Develop professional technical and legal reports on building and construction projects
    CPCCBC5014A Conduct asbestos assessment associated with removal
    CPCCWHS1001 Prepare to work safely in the construction industry
    CPPDSM5022A Implement asset management plan

    BSB51415 – Diploma of Project Management

    Total number of units = 12

    8 core unit’s plus

    4 elective units, of which:

    • 4 elective units may be selected from the elective units listed below or any endorsed Training Package or accredited course at Diploma level or higher.
    • Elective units must be relevant to the work environment and the qualification, maintain the integrity of the AQF alignment and contribute to a valid, industry-supported vocational outcome. They must not include the choice of the unit BSBPMG522 Undertake project work.
    • Units
    • Core Units
    • Elective units

    Units

    Core Units

    BSBPMG511 Manage project scope

    BSBPMG512 Manage project time

    BSBPMG513 Manage project quality

    BSBPMG514 Manage project cost

    BSBPMG515 Manage project human resources

    BSBPMG516 Manage project information and communication

    BSBPMG517 Manage project risk

    BSBPMG521 Manage project integration

    Elective units

    BSBINM501 Manage an information or knowledge management system

    BSBINN502 Build and sustain an innovative work environment

    BSBMGT516 Facilitate continuous improvement

    BSBPMG518 Manage project procurement

    BSBPMG519 Manage project stakeholder engagement

    BSBPMG520 Manage project governance

    BSBSUS501 Develop workplace policy and procedures for sustainability

    BSBWHS506 Contribute to developing, implementing and maintaining WHS management systems

    BSBWOR501 Manage personal work priorities and professional development

    BSBWOR502 Lead and manage team effectiveness

    ICTICT511 Match ICT needs with the strategic direction of the enterprise

    ICTICT515 Verify client business requirements

    MSS015002A Develop strategies for more sustainable use of resources

    PSPETHC501B Promote the values and ethos of public service